Download houses and components which are created and shared by an open community of designers from around the world.

Click 'Make this House' from within Google Sketchup and WikiHouse will generate a complete set of milling drawings from your model, which can be used by a CNC cutter to fabricate the house parts.

The parts are cut by a CNC mill using locally-sourced material. This is 18mm plywood, in the standard sheet size of 2440mm x 1220mm (8' x 4').

Set out the parts for each section onto the ground, assembling it like a double-layered jigsaw. You won't need any power tools.

Bolt together the two layers to form a single section.

Invite friends and family to help with the 'barn-raising'. Stand the sections up vertically, positioning them approximately at 550mm intervals.

Insert the primary connectors to stabilise the structure. Use the mallet provided on the milling sheets to hammer the pegs into place.

Fit the secondary connectors into the slots in the section.

Fit the internal and external cladding panels onto the structure. Internally these usually need to be screwed into place.

The structure is ready for insulation, cladding, sealing, and services.